Water level

Lake Ray Hubbard water level

Lake Ray Hubbard is at 432.67 ft (2.8 ft below the 435.5 ft full pool), about 87% full as of Sep 9, 2026. Live readings, trend, history and what the level means for swimming and boat ramps.

432.67 ft -0.33 ft in 7 days

Reading of Sep 9, 2026 · source: USGS

87% of conservation capacityFull pool 435.5 ft
Full pool 435.5 ft432.3433.3434.4435.4436.42025-092026-032026-09
━ Water surface elevation (ft)- - - Full pool

Recent readings

Daily values from USGS gauge 08061550.

DateElevation (ft)Change
2026-09-08432.71-0.05
2026-09-07432.76-0.05
2026-09-06432.81-0.04
2026-09-05432.85-0.04
2026-09-04432.89-0.03
2026-09-03432.92-0.07
2026-09-02432.99-0.05
2026-09-01433.04

Operating levels set by the Corps of Engineers

Reference elevations published by the SWF district for this project.

Reference levelElevation
Streambed386.0 ft
Top of Conservation435.5 ft
Top of Inactive390.0 ft
Top of Inactive388.0 ft
Top of Induced Surcharge450.0 ft

What this level means

The level comes from gauge 08061550, Lk Ray Hubbard nr Forney, TX, and carries the time it was taken. That put the reservoir at 87% of its conservation capacity. The conservation pool tops out at 435.5 ft. The last value stored here, 432.67 ft, is from 2026-09-09. Over the record shown on the level page the gauge has moved between 432.71 ft and 436.01 ft (low on 2026-09-08, high on 2026-05-27). Conservation capacity is 439,559 acre-feet. When the pool drops, shoreline beaches grow and shallow ramps can run out of concrete.

Over the last 400 days the gauge has ranged from 432.71 ft (2026-09-08) to 436.01 ft (2026-05-27). These are the limits of that window, not all-time records.

How this reading is taken

USGS gauge 08061550 measures the water surface and publishes the value continuously. This page stores the latest reading at build time and refreshes the record daily, so the figure above is a real measurement rather than a model or an estimate.

Full pool for Lake Ray Hubbard is 435.5 ft, so the gap between the reading and that number is what the reservoir is missing.

Elevations are given in feet above the gauge datum used by the operating agency. Two lakes are only comparable with each other through how full they are, not through their raw elevation, because each dam sits at a different height.

Water level questions

What is the current water level at Lake Ray Hubbard?

The latest reading is 432.67 ft, 2.8 ft below the 435.5 ft full pool, from USGS gauge 08061550.

How full is Lake Ray Hubbard?

It was last reported at 87% of conservation capacity, holding 382,691 of 439,559 acre-feet.

What is full pool at Lake Ray Hubbard?

Full pool is 435.5 ft. Water above that level is flood storage and is released as conditions allow.

Sources

Every figure on this page comes from one of these public sources.